Auto Finesse Power Seal 500ml

Paintwork Sealant

Auto Finesse Power Seal paint sealant features advanced cross-linking polymers that can last up to a year on a daily driver! Its slick, glass-like finish helps to release contamination, while tough molecular bonds allow it to shrug off weathering and fallout with ease.

Application:

Auto Finesse Power Seal needs to be applied to clean bare paint, whether it be freshly polished and cleaned with Isopropyl Alcohol (IPA), or prepared with our Tough Prep product.

Before use, give the product a good shake to integrate the ingredients. Power Seal can be applied by hand, dual action (DA), or rotary polisher, with instructions as follows:

Hand – Apply the product sparingly to the black side of a Dual-Foam Applicator Pad, and work it into a small, manageable section of the paintwork. Use small, overlapping, circular motions, and go over the area until the residue just starts to disappear. A very light haze of product should still remain. Once an entire panel has been completely sealed, you can immediately buff off the residue using a Plush Microfiber Towel.

Dual Action Polisher – Apply 3-4 pea-sized drops of product to a soft foam finishing pad and spread onto a manageable section of the paintwork using the lowest machine speed. We like to apply it to an entire small panel, or half of a larger panel at a time. Once the product has been spread, increase the speed to between 4000 and 5000 OPM’s and work in slow overlapping passes until the product residue just starts to disappear. A very light haze of product should still remain. Once an entire panel has been completely sealed, you can immediately buff off the residue using a microfibre towel.

Rotary Polisher – Apply 3-4 pea-sized drops of product to a soft foam finishing pad and spread onto a manageable section of the paintwork using the lowest machine speed (an entire small panel, or half of a larger panel at a time). Continue to work in slow overlapping passes, at approximately 600-900 RPM, until the product residue just starts to disappear. A very light haze of product should still remain. Once an entire panel has been completely sealed, you can immediately buff off the residue using a microfibre towel.

Do not use Power Seal in direct sunlight, or in temperatures below 0-degrees Celsius.